8x6 Bike Shed in Toronto, Ontario

See It in Action
No Spare Room for Bikes and Gear: An 8x6 Bike Shed in Toronto
In plenty of compact Toronto backyards there's no garage and no spare corner for bikes and gear, so they end up inside the house. This 8x6 Cube Shed from Backyard Escape Studios gives them a home of their own in the back corner of a small, landscaped yard.
That corner is bordered by a tall wood fence on two sides and a white-stone garden bed with small trees. BES sized the shed to the space: a custom footprint of 8 feet by 6 feet 4 inches, set a couple of inches off the fence, with room left at the back for the downspout.
The door swings out rather than in, so it takes up none of the floor space inside.
Jet Black Steel and Natural Pine on a Toronto Cube Shed
The cladding pairs Jet Black 7/8 inch corrugated steel with 1x6 horizontal tight-knot pine tongue-and-groove, left natural with no stain. Jet Black steel trim and flashing finish the edges.
The split wraps around the building. On the front wall, 76 inches of pine holds the door and a 20 inch strip of steel finishes the right side. On the left wall, 24 inches of pine wraps the front corner and 52 inches of steel runs to the back.
A Frosted Glass Door and Enclosed Pine Overhang on This Bike Shed
The 36x80 black full-glass frosted door sits on the left side of the front wall, hinged on the right with a standard silver lock. Above it, a 12 inch overhang runs across the front only, with the soffit enclosed in the same pine and finished with L trim at the corner.
The flat roof is a FullForce EPDM membrane with a 9 inch drip edge, and a roof drain on the back wall aims the downspout into the garden bed. Inside, the walls stand about 8 feet high, and the roof sits about 105 inches above the ground outside.
Under the cladding, the frame is 2x4 walls at 24 inches on centre with 7/16 OSB sheathing and house wrap, 2x6 roof framing and a pressure-treated bottom plate on an existing concrete pad. BES prefabricated the walls in its shop, then assembled the shed on site in Toronto.
Custom Shed Builder in Toronto and Across the GTA
Backyard Escape Studios designs, builds and installs custom sheds and bike sheds across Toronto, from Midtown to North York, Etobicoke and Scarborough. Design, build and service come from one team, so there are no construction headaches to manage.
Beyond Toronto, BES works throughout the GTA, including Vaughan, Markham, Richmond Hill and Mississauga. Browse the shed gallery for more finished builds, read our guide to outdoor storage shed layouts for cyclists, or ask about a bike shed in Toronto built to a higher standard.
Project Specifications
What Our Customers Are Saying
From transforming cluttered yards into organized spaces to creating serene backyard retreats, we’ve helped countless homeowners bring their vision to life. Here’s why our customers keep recommending us:
Start Building with Us Today
Today is the day to start building the structure of your dreams. Share your design ideas with us so we can get started on bringing your shed to life.







